A furnace humidifier pad does the real work inside a whole-house humidifier: warm furnace air passes over it while water flows across it, evaporating into the air stream. A fresh pad holds indoor humidity in the comfortable band; a scaled pad cuts output, makes the humidifier run longer for less effect, and can start to smell stale.
These pads are not interchangeable: each is cut for a specific humidifier cabinet, and two near-identical pads can differ in thickness, frame fit, and how they sit in the water distribution tray. The model number on the humidifier cabinet matters more than the old pad’s size or the furnace brand. This guide matches five pads to the humidifiers they serve, using published specifications and compatibility lists. As an Amazon Associate, we earn from qualifying purchases.
The Short Answer
For an Aprilaire 600 or 700 series humidifier, buy the Aprilaire 35 Water Panel in the pack of two — the genuine panel for the widest range of Aprilaire bypass and fan-powered units, covering two heating seasons at the standard once-a-season change interval. For a smaller Aprilaire 500 series unit, the Aprilaire 10 is the matching panel, the only pick sized for the 110, 220, 500, 550, and 558 cabinets. Honeywell owners with a large bypass humidifier should choose between the antimicrobial-coated HC26E1004 and the standard paper HC26A1008, both for the HE200 to HE360 class. GeneralAire owners need the 990-13 vapor pad, the only pick here built for the 1040 and 1042 flow-through units.
Table of Contents
- The Short Answer
- How to Choose a Furnace Humidifier Pad
- Aprilaire 35 Water Panel (Pack of 2) — Best Overall
- Aprilaire 10 Water Panel (Pack of 2) — Best for Compact Humidifiers
- Honeywell HC26E1004 Humidifier Pad — Best Antimicrobial Large Pad
- GeneralAire 990-13 Humidifier Water Pad — Best for GeneralAire Units
- Honeywell HC26A1008 Humidifier Pad — Best Standard Large Pad
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Furnace Humidifier Pad
Start with the humidifier model number, not the furnace. The data label usually sits on the humidifier cover or inside the case, and shows a model such as 600, 700, HE360, or 1042: Aprilaire units are numbered in the hundreds, Honeywell units carry an HE prefix, and GeneralAire units carry four-digit numbers. Match that number to the panel the manufacturer lists for it. If the label is gone or painted over, measure the old pad — height, width, and thickness in inches are the nominal size parts sellers list — but treat it as a cross-check, not a substitute for the model number, since some models have letter suffixes that change the fit.
Size alone will mislead you. The Aprilaire 35 and 45 are the pair most often confused: sellers measure both at about 10 inches high by 13 inches wide, yet their thickness and fit against the water distribution tray differ, and they are not interchangeable. The 35 belongs to the 300, 350, 360, 560, 600, and 700 series, while the 45 belongs to the 400 series only. The same warning applies across brands: Honeywell’s small HC22 pads serve the HE100 to HE225 class, while the large HC26 pads serve the HE200 to HE360 class. A pad that does not seat flush lets air bypass the wet surface.
Coating is the next decision. Some pads carry an antimicrobial coating that inhibits mold, bacteria, fungus, and algae on the pad surface — Honeywell calls its coating AgION, and AprilAire treats its genuine panels with an antimicrobial agent as well. A standard paper pad does the same evaporative job for less when the pad is changed on schedule and the water is treated or soft.
AprilAire recommends changing the water panel once per heating season for most models, with the model 400 panel changed twice per heating season because that unit uses more water. Honeywell recommends replacing the pad once per year, or whenever the replace-pad light comes on. GeneralAire recommends one to two times per season.
OEM and compatible panels are both sold for the most common humidifiers. Genuine panels from Aprilaire, Honeywell, or GeneralAire are made to the manufacturer’s specification and are the safest fit; genuine Aprilaire panels are made in the United States. Compatible panels from third-party filter makers are sold with a cross-reference to the OEM number, many using aluminum mesh — but check exactly what is packed, since some bundle a panel with a maintenance kit. Buy a multipack only after the fit is proven, and store spares in a dry place, since an unused panel in a damp basement can pick up odors.
Pay attention to orientation when the new pad goes in. Most panels have a colored spot or arrow marking the top edge, which must face upward so water distributes evenly. Slide the panel into its plastic frame or scale control insert, reconnect the feed tube and nozzle, and press the reset button if the humidifier has a replace-pad indicator. The whole job takes minutes once the right panel is in hand.
Aprilaire 35 Water Panel (Pack of 2) — Best Overall
The Aprilaire 35 is the genuine water panel for the largest family of Aprilaire whole-house humidifiers, covering the 300, 350, 360, 560, 560A, 568, 600, 600A, 600M, 700, 700A, 700M, 760, 760A, and 768 models — both bypass units such as the 600 and fan-powered units such as the 700. It is built from a heavy-duty aluminum mesh frame with a porous ceramic-type coating that absorbs water for evaporation, and is treated with an antimicrobial agent to resist mold, bacteria, viruses, and fungi.
Its published dimensions are 10 inches wide by 13 inches high by 1.75 inches deep. Product information lists an 18 gallon per day capacity. The listing is a genuine AprilAire part made in the United States by Research Products Corporation. One crawl showed no featured offers available, so confirm that an offer exists before ordering, and confirm the pack size, since the same panel is sold separately as a single pack, a two-pack, a four-pack, and a ten-pack.
The main trap is the 45: the two panels measure nearly the same on the outside, but the 45 is built for the 400 series only and is not a substitute. If your humidifier is a 400, 400A, or 400M, do not buy the 35. The other trap is the compatible market — third-party panels claiming to fit the 35 are common, including a Chadamyi-branded version sold under the same Aprilaire 35 title, one crawl of which showed it currently unavailable. The genuine panel here is the safer buy for a first replacement.
Specs
- Brand: Aprilaire
- Model: 35 Water Panel, pack of 2
- ASIN: B0076OW80S
- UPC: 686720035029
- Fits: Aprilaire 300, 350, 360, 560, 560A, 568, 600, 600A, 600M, 700, 700A, 700M, 760, 760A, 768
- Dimensions: 10 inches W x 13 inches H x 1.75 inches D
- Material: Aluminum mesh frame with porous ceramic-type coating, antimicrobial treated
- Capacity: 18 gallons per day, per product information
- Replacement: Once per heating season
- Value group: Mid-range
Aprilaire 10 Water Panel (Pack of 2) — Best for Compact Humidifiers
The Aprilaire 10 is the matching panel for the smaller Aprilaire humidifiers, the only pick here sized for the 110, 220, 500, 500A, 500M, 550, 550A, and 558 cabinets. It measures 9.5 inches wide by 9.75 inches high by 1.75 inches deep and weighs 1.52 pounds, using the same construction as its larger sibling: a heavy-duty aluminum mesh frame with a porous ceramic-type coating that wicks water upward and holds it for evaporation. Like the 35, it is a genuine AprilAire part made in the United States, sold in packs of one, two, four, and ten.
The listing copy recommends replacing the panel twice during the season, while AprilAire’s own replacement table lists the 10 as once per heating season, so confirm the schedule in the owner’s manual. One crawl of this listing, about 355 days ago, showed no featured offers available, so check that an offer exists before ordering, and confirm the pack count at checkout, since the single-pack version circulates under its own code and the four-pack has been sold on a regional Amazon store.
The 10 is easy to confuse with the 12, a taller panel at 14.75 inches high by 11.5 inches long by 1.75 inches deep, built for the older 112, 224, 225, 440, 445, and 448 humidifiers. The 12 does not fit the 500 series cabinets and the 10 does not fit the 440 series. The panel is sometimes listed as the 1110 by sellers merging the humidifier series with the panel number, but the part is the Model 10 water panel, for the 110, 220, 500, 550, and 558 family.
Specs
- Brand: Aprilaire
- Model: 10 Water Panel, pack of 2
- ASIN: B00KMSP4TM
- UPC: 686720000102
- Fits: Aprilaire 110, 220, 500, 500A, 500M, 550, 550A, 558
- Dimensions: 9.5 inches W x 9.75 inches H x 1.75 inches D
- Weight: 1.52 pounds
- Material: Aluminum mesh frame with porous ceramic-type coating
- Pack sizes: 1, 2, 4, or 10, each sold separately
- Value group: Budget
Honeywell HC26E1004 Humidifier Pad — Best Antimicrobial Large Pad
The Honeywell HC26E1004 is the large AgION-coated pad for Honeywell bypass humidifiers. The AgION coating inhibits mold, bacteria, fungus, and algae on the pad surface. The pad measures 10 inches wide by 13 inches high by 1.5 inches deep and weighs 0.9 pounds, and fits the Honeywell HE200, HE250, HE260, HE265, HE300, HE360, and HE365 humidifiers. It also cross-references to Aprilaire humidifiers in the 350, 360, 560, 568, 600, 700, 760, and 769 range.
The HE265 ships with this AgION pad, while the HE260 ships with the standard paper pad, and the two are interchangeable, so an HE260 owner can upgrade to the coated pad and an HE265 owner can fall back to the standard pad. Reach it from the side by gripping the handle and pulling out, or from the front by removing the top cover and rocking the pad forward. The size is close to the Aprilaire 35, which measures the same 10 by 13 inches but is a quarter inch thicker at 1.75 inches, so do not swap them on dimensions alone.
Confirm the barcode before ordering: the price-history record lists one UPC, while the Resideo product sheet lists a different UPC. The part number HC26E1004 is consistent across both records, so confirm by part number and HE model rather than by the barcode alone.
Specs
- Brand: Honeywell
- Model: HC26E1004, AgION antimicrobial coating
- ASIN: B000EOM6Z4
- Fits: Honeywell HE200, HE250, HE260, HE265, HE300, HE360, HE365; Aprilaire 350, 360, 560, 568, 600, 700, 760, 769
- Dimensions: 10 inches W x 13 inches H x 1.5 inches D
- Weight: 0.9 pounds
- Material: Evaporative pad with AgION antimicrobial coating
- Replacement: Once per year, or when the replace-pad light comes on
- Value group: Premium
GeneralAire 990-13 Humidifier Water Pad — Best for GeneralAire Units
The GeneralAire 990-13 is the vapor pad for GeneralAire flow-through humidifiers, the only pick here built for the 1040 and 1042 cabinets. It fits the GeneralAire 709, 990, 1040, 1042, 1042LH, 1137, and SL16 humidifiers, and is cross-listed for Trion G100 and G300 units, the Herrmidifier 100, and Protech part numbers 84-25054 and 84-25054-05. The pad measures 9-3/4 inches wide by 12-1/4 inches high by 1-1/2 inches deep and weighs about 1.5 pounds, built from expanded aluminum evaporator material in a heavy wire frame, with a super absorbent coating and a non-soluble wetting agent for water distribution.
The 1042 humidifier this pad serves is rated at 17 gallons per day at a 120-degree plenum temperature. GeneralAire recommends replacing the vapor pad one to two times per season, its manual recommending twice per heating season, so a home with hard water should plan on the shorter interval. The pad is a custom-sized filter built to tolerances of plus or minus one eighth of an inch, another reason to buy by humidifier model.
Two codes circulate for this pad, and both should be checked before ordering: the code used here comes from a Woot review record for the OEM GeneralAire 990-13 evaporator pad, while a manuals site hosts the instruction manual for the same pad under a second code. Either code may belong to a different pack size or seller listing, so confirm which matches the single pad with GFI number 7002. Buyer notes have also questioned whether the pad is described as discontinued, so confirm the listing status at checkout.
Specs
- Brand: GeneralAire
- Model: 990-13 Humidifier Water Pad, GFI 7002
- ASIN: B00GKHALNI
- Fits: GeneralAire 709, 990, 1040, 1042, 1042LH, 1137, SL16; Trion G100, G300; Herrmidifier 100
- Dimensions: 9-3/4 inches W x 12-1/4 inches H x 1-1/2 inches D
- Weight: About 1.5 pounds
- Material: Expanded aluminum evaporator material in heavy wire frame, super absorbent coating
- Replacement: Twice per heating season, per the manual
- Value group: Mid-range
Honeywell HC26A1008 Humidifier Pad — Best Standard Large Pad
The Honeywell HC26A1008 is the standard large pad for the same Honeywell humidifiers that take the AgION-coated HC26E1004, for owners who change the pad on schedule and do not need the antimicrobial coating. It is a paper pad rather than a coated pad, listed for the HE260 and HE360 series in its own manual, with wider HC26-series fitment covering the HE200, HE250, HE260, HE265, HE280, and HE360 humidifiers. It also cross-references to Aprilaire humidifiers in the 350, 360, 560, 568, 600, 700, 760, and 768 range.
The pad measures about 1 inch deep by 10 inches wide by 14 inches high, taller and thinner than the coated HC26E1004, so the two are not the same shape even though they serve the same humidifiers. Check the pad that comes out of the cabinet rather than assuming any large Honeywell pad will fit. The HE260 humidifier ships with this standard pad, and it can be replaced with the antimicrobial version and back again, since the two share the same cabinet fit. The pad is made in China, and the listing carries a long list of barcode values under one product, which reads like a catalog quirk rather than a set of distinct products, so confirm by part number HC26A1008 and HE model.
One caution: a widely circulated GeneralAire and Honeywell parts catalog table misaligns some part numbers with their descriptions, and one row attaches the HC26A1008 code to a small coated pad description that does not match it. The consistent records, including the pad’s own manual and the fitment guides, describe the HC26A1008 as the large standard pad for the HE200 to HE360 class.
Specs
- Brand: Honeywell
- Model: HC26A1008, standard paper pad
- ASIN: B001Q8Z81Q
- Fits: Honeywell HE200, HE250, HE260, HE265, HE280, HE360; Aprilaire 350, 360, 560, 568, 600, 700, 760, 768
- Dimensions: About 1 inch D x 10 inches W x 14 inches H
- Material: Standard evaporative paper pad, no antimicrobial coating
- Country of origin: China
- Replacement: Once per year
- Value group: Budget
Frequently Asked Questions
How do I know which furnace humidifier pad fits my humidifier?
Read the model number off the data label on the humidifier cabinet, usually on the cover or inside the case, and match it to the manufacturer’s panel for that model. Measure the old pad only as a cross-check, since panels that look the same size can differ in thickness and frame fit — the 35 and 45 measure nearly alike and are not interchangeable.
How often should I replace a furnace humidifier pad?
Follow the humidifier’s own schedule. AprilAire recommends once per heating season for most models, with the model 400 panel changed twice per heating season. Honeywell recommends once per year, or whenever the replace-pad light comes on. GeneralAire recommends one to two times per season, its manual recommending twice per heating season. Hard water shortens pad life on every brand, so inspect the pad mid-season and change it sooner if heavy mineral scale has caked onto the mesh.
Can I use a Honeywell pad in an Aprilaire humidifier?
Sometimes, but only when the parts catalog cross-lists the two. The Honeywell HC26E1004 and HC26A1008 are both cross-listed for Aprilaire humidifiers in the 350, 360, 560, 568, 600, 700, and 760 range, because those cabinets take a 10 by 13 inch pad. The small Honeywell HC22 pads are cross-listed for the smaller Aprilaire 110, 220, 550, and 558 cabinets. Do not swap pads on size alone, since a quarter inch of thickness or a different frame can keep the pad from seating flush.
What is the difference between an antimicrobial pad and a standard pad?
An antimicrobial pad carries a coating that inhibits mold, bacteria, fungus, and algae on the pad surface, while a standard pad has no such coating. The coating is worth having when the humidifier runs for long stretches or the water is hard, but it does not replace regular replacement, since mineral scale builds up on every pad as water evaporates.
Conclusion
The right furnace humidifier pad is the one that matches the model number on the humidifier cabinet. The Aprilaire 35 Water Panel in the pack of two is the best overall pick because it serves the widest range of Aprilaire humidifiers. The Aprilaire 10 is the pick for the smaller 500 series cabinets, since nothing else in this guide fits those units. Honeywell owners choose between the AgION-coated HC26E1004 and the standard paper HC26A1008, which serve the same large bypass humidifiers. GeneralAire owners need the 990-13, the only pad here built for the 1040 and 1042 flow-through units.
A note on sourcing. Only one of the five codes in this guide comes from an explicit amazon.com Product information excerpt, the Aprilaire 35. The Aprilaire 10 code comes from the Amazon product page address for that exact listing, the Honeywell HC26E1004 code from a camelcamelcamel price-history record, the GeneralAire 990-13 code from a Woot review record for the OEM pad, and the Honeywell HC26A1008 code from a manuals record. Two codes need a second check: the GeneralAire 990-13 has a second code in circulation from a manuals record, so check both codes and use whichever matches the single pad with GFI number 7002; and the Honeywell HC26E1004 has conflicting barcode values between the price-history record and the Resideo product sheet, so confirm by part number rather than by barcode.
Products dropped during research, with reasons. The Aprilaire 45 Water Panel for the 400 series was dropped because no code surfaced in an explicit product information excerpt, a product page address, a price-history record, or a manuals record in this research pass, and the 4788 maintenance kit that contains the 45 panel is a kit rather than a pad-only product. The Aprilaire 12 Water Panel was dropped for the same reason, since no code surfaced for it. The Honeywell HC22E1003 small AgION pad was dropped because no code surfaced for it either, even though its barcode and fitment are published. The Chadamyi compatible Aprilaire 35 panel was dropped because it is a third-party compatible rather than a genuine panel, and one crawl showed it currently unavailable. The Sconva 4839 maintenance kit and the Aprilaire HYDRLH hard water kit were dropped because both are kits rather than pad-only products. The Aprilaire 10 single pack and the Honeywell HC26P1002 standard pad were dropped for variety, since the two-pack and the HC26A1008 already fill those slots.





Write Your Review
No reviews yet. Be the first to share your experience!