- Top Pick: Basement Watchdog Big Combo CONNECT CITS-50
- Runner-up: Basement Watchdog Special CONNECT BWSP
- Also consider: Zoeller Aquanot 508
A sump pump only protects a basement while it has power, and the storms that fill a sump pit also knock power out. When the main pump stops, water keeps rising, and a nearly empty pit can overflow across a basement floor in a single night.
The five systems below cover the two ways to buy backup protection: three backup-only units that sit beside a primary pump you own, and two preassembled combination systems that replace both pumps at once. Every system here runs on a 12 volt deep cycle battery sold separately, so the battery matters as much as the pump itself.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most basements, the Big Combo CONNECT CITS-50 is the top pick, pairing a 1/2 HP primary pump with a 2,600-gallon-per-hour backup, dual float switches, and round-the-clock monitoring in one preassembled unit. If your primary pump is healthy, add the Special CONNECT BWSP. For a self-testing controller, choose the Zoeller Aquanot 508.
1. Basement Watchdog Big Combo CONNECT CITS-50
The Big Combo CONNECT CITS-50 is the most complete system here, and the right choice when the primary pump is old. A 1/2 HP cast iron primary pump moves up to 4,400 gallons per hour at ground level and 3,540 at a 10 foot lift, while the battery backup pump moves 2,600 at ground level and 1,850 at a 10 foot lift.
The controller watches pump, power, and battery around the clock and shows problems and fixes on its front panel. Each pump has its own dual micro-reed float switches. A 1.6 amp smart charger keeps the battery full, and the system can use two batteries in parallel. With one AGM battery, the maker rates it for 48 hours of pumping at a one-tenth duty cycle.
Specs
- Type: preassembled primary and battery backup combination
- Primary motor: 1/2 HP, cast iron housing
- Primary flow: 4,400 gallons per hour at 0 feet, 3,540 at 10 feet
- Backup flow: 2,600 gallons per hour at 0 feet, 1,850 at 10 feet
- Float switches: two dual micro-reed switches, one set per pump
- Charger: 1.6 amp smart charger
- Controller: 24-hour monitoring with alarm and indicator panel
- Battery: 12 volt deep cycle, sold separately
- Warranty: 2 years
- Tier: premium
2. Basement Watchdog Special CONNECT BWSP
The Special CONNECT BWSP is the backup-only pick for homes whose primary pump still works. It takes over when power fails, the main pump fails, or inflow exceeds the main pump capacity. It moves 2,600 gallons per hour at ground level and 1,850 at a 10 foot lift, matching the backup pump inside the larger CITS-50 above. At 9 by 5 by 7.63 inches, it fits pits with room for a second pump.
The controller monitors pump, power, and battery around the clock and pinpoints problems on its panel. A dual float switch gives two floats for redundancy, and the system exercises the pump weekly so a fault shows up before a storm. The 1.6 amp smart charger keeps the battery ready, and the system works with AGM or wet-cell batteries.
Specs
- Type: backup-only system, installs beside an existing primary pump
- Backup flow: 2,600 gallons per hour at 0 feet, 1,850 at 10 feet
- Float switch: dual float switch
- Charger: 1.6 amp smart charger
- Controller: 24-hour monitoring with alarm and indicator panel
- Self-test: weekly pump exercise
- Battery: 12 volt deep cycle, AGM or wet-cell, sold separately
- Warranty: 2 years limited
- Tier: mid-range
3. Zoeller Aquanot 508
The Zoeller Aquanot 508, model 508-0005, is the backup-only system for buyers who want a self-testing controller. Its LCD screen shows battery voltage, and the controller runs self-tests so the backup is checked without waiting for a flood. The 12 volt backup pump moves up to 40 gallons per minute, with continuous pumping rated up to 5.5 hours. Its 10 amp solid-state charger is the strongest among the backup-only systems here.
The system includes a vertical float switch, an integrated DC pump discharge check valve, an extra check valve and tee for the primary pump, and a battery case for group 27, 29, and 31 batteries. Warranty runs 12 months, extending to 36 months with an Aquanot battery. The battery is not included.
Specs
- Type: backup-only system, installs beside an existing primary pump
- Maximum flow: 40 gallons per minute
- Continuous runtime: up to 5.5 hours on a charged battery
- Charger: 10 amp solid-state automatic charger
- Battery case: fits group 27, 29, and 31 batteries, battery not included
- Warranty: 12 months, extended to 36 months with an Aquanot battery
- Tier: premium
4. Wayne ESP25
The Wayne ESP25 is the highest-flow backup-only pump here, moving up to 3,300 gallons per hour with a maximum lift of 20 feet. Its reed float switch suits small pits: the float needs only minimal travel to activate, which reduces hang-ups in tight basins. Smart charging keeps the battery charged, and an audible alarm plus LED lights show when the backup has activated and the charge status.
The ESP25 installs beside an existing primary pump without major plumbing changes, and it works as a booster as well as a standby: if water rises past the backup float while the main pump is running, the backup switches on to help. A 75 amp hour deep cycle battery is recommended but not included, and the system carries a 2 year parts warranty. Wayne now sells a newer ESP25n, rated at 2,700 gallons per hour at ground level, so check the model number before buying.
Specs
- Type: backup-only system, installs beside an existing primary pump
- Maximum flow: 3,300 gallons per hour
- Maximum lift: 20 feet
- Float switch: reed float switch, minimal travel
- Charger: smart charging included
- Battery: 12 volt deep cycle, 75 amp hour recommended, sold separately
- Warranty: 2 years, parts only
- Tier: mid-range
5. Zoeller Aquanot 508 ProPak53
The Zoeller Aquanot 508 ProPak53, model 508-0006, is a preassembled combination system for buyers who want a professional-grade primary and backup pair. It pairs the Zoeller M53 Mighty-Mate, a 1/3 HP cast iron primary pump, with the 12 volt Aquanot 508 backup pump, joined by 1-1/2 inch PVC pipe with check valves, a controller, and a battery box. The whole unit arrives fully assembled and ready to install.
The backup side shares the Aquanot 508 controller, with the same self-testing operation, LCD display, 10 amp charger, and alarm contacts. Because the pumps are matched and plumbed at the factory, the system avoids the fitting guesswork of a do-it-yourself build. Warranty runs 3 years.
Specs
- Type: preassembled primary and battery backup combination
- Primary motor: 1/3 HP Zoeller M53, cast iron housing
- Backup motor: 12 volt DC Aquanot 508
- Charger: 10 amp solid-state automatic charger
- Battery case: fits group 27, 29, and 31 batteries, battery not included
- Warranty: 3 years
- Tier: premium
How to Choose a Sump Pump Battery Backup
Start with flow at a realistic lift, not at ground level: measure the vertical distance from the pump to the discharge point, then compare systems by flow at that height. A backup rated at 2,600 gallons per hour at ground level moves closer to 1,850 at a 10 foot lift, and that gap decides whether the basement stays dry.
Next, decide between a backup-only unit and a combination system. If the primary pump is healthy, a backup-only unit such as the BWSP, the Aquanot 508, or the ESP25 adds protection at a lower cost. If the primary pump is old or undersized, a combination system replaces both at once. Check the pit first: measure its diameter and depth, and confirm the backup pump and float switch fit beside the primary.
Budget for the battery, because none of these systems includes one. Most take a 12 volt deep cycle marine battery in group 27, 29, or 31 sizes, and a larger battery means longer runtime. A stronger charger restores a drained battery faster, and a controller with self-testing and clear alarms catches a dead battery before the next storm.
Who Should Skip These Backup Systems
Skip a battery backup if the basement has never taken on water and the pit stays dry through heavy rain. Skip a backup-only unit if the primary pump is failing or undersized, because the backup cannot carry the full load indefinitely.
Skip these systems if the pit is too small for two pumps, since a float switch that cannot move freely will run dry or never start. Skip a battery backup if a standby generator already powers the primary pump during outages. Do not substitute a car starter battery for a deep cycle battery.
Frequently Asked Questions
How long will a battery backup sump pump run?
Runtime depends on battery size, inflow, and lift height. Makers rate these systems from a few hours of continuous pumping to about two days of intermittent pumping on one battery. A larger group 31 battery runs longer than a group 27 battery.
What size battery does a sump pump battery backup need?
Most systems here take a 12 volt deep cycle marine battery in group 27, 29, or 31 sizes, and the maker usually recommends 75 amp hours. A deep cycle battery is built for slow discharge and recharge, which is how a backup pump uses it. The battery is sold separately with every system here, and it needs replacing every three to five years.
Can a battery backup replace my primary sump pump?
No, a battery backup is a standby, not a replacement. Backup pumps move less water than a primary pump, and the battery runs down after hours of use. The backup covers outages, primary pump failure, and inflow that overwhelms the main pump, but the primary pump should handle everyday water. If the primary pump is failing, replace it, or use a combination system to renew both at once.
How often should I test a sump pump battery backup?
Test the system twice a year, before and after the wet season. Pour water into the pit until the backup float activates, confirm the pump runs, and check that the controller shows a charged battery. Check the battery fluid on wet-cell batteries, clean the terminals, and confirm the discharge line is clear.
Final Verdict
The Basement Watchdog Big Combo CONNECT CITS-50 is the best sump pump battery backup for most basements, with a 1/2 HP primary pump, a 2,600-gallon-per-hour backup, dual float switches, and round-the-clock monitoring in one preassembled unit at a premium tier. If the primary pump is healthy, the Special CONNECT BWSP adds the same backup pump. The Zoeller Aquanot 508 suits buyers who want a self-testing controller with a battery voltage display, while the Wayne ESP25 offers the highest backup flow. The Zoeller ProPak53 is the pick when both pumps need replacing. Measure the pit, check the lift height, budget for a battery, and test twice a year.





Write Your Review
No reviews yet. Be the first to share your experience!