- Top Pick: PATIKIL 4.25 Inch Duct Connector Flange
- Runner-up: HG Power 6 Inch Duct Connector
- Also consider: Allvent Duct Connector Flange 6 Inch
A duct connector is the small fitting that decides whether a ventilation run stays sealed or slowly leaks air into a wall cavity, attic, or laundry room. A loose joint lets conditioned air escape, gathers dust around the gap, and slows a dryer’s exhaust. A well-matched connector solves that with a flange that sits flat, a collar that grips the duct, and screw holes that hold the assembly in place.
- Quick Answer
- PATIKIL 4.25 Inch Duct Connector Flange
- HG Power 6 Inch Duct Connector
- Allvent Duct Connector Flange 6 Inch
- PATIKIL 3.5 Inch Duct Connector Flange
- Hon&Guan 3 Inch Duct Connector 2-Pack
- How to Choose a Duct Connector
- Who Should Skip a Duct Connector Flange
- Frequently Asked Questions
- Final Verdict
This guide covers five flange-style duct connectors for common home jobs: joining flexible duct to a dryer vent, an inline fan, a range hood, or a bathroom exhaust fan. Each pick is described from its published specifications so you can match size and material to your run.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most home ventilation jobs, the PATIKIL 4.25 inch stainless steel duct connector flange is the best duct connector: its metal body resists rust and heat, it anchors firmly to a wall, and its 4.25 inch interface suits dryer vents and small exhaust fans. For 6 inch ducting, pick the HG Power 6 inch ABS flange instead.
PATIKIL 4.25 Inch Duct Connector Flange
The PATIKIL 4.25 inch duct connector flange is a stainless steel fitting built for dryer vents, bathroom exhaust fans, kitchen exhaust fans, inline duct fans, and range hoods. Its metal body suits warm, damp air better than plastic, so it is a sensible choice behind a dryer or above a stove. The flange mounts to a wall with screws, and the duct hose slides over the collar and is secured with a hose clamp.
Sizing is the detail to confirm before ordering: the interface has an outer diameter of 108 mm (4.25 inches), so it matches ducting and fan outlets in that size range rather than a nominal 4 inch duct. Measure the outside diameter of the duct or outlet, and confirm the mounting surface is flat and large enough for the flange face.
Specs
- Material: 201 stainless steel
- Interface outer diameter: 108 mm (4.25 inches)
- Overall dimensions: 158 mm x 100 mm (6.22 x 3.93 inches)
- Mounting hole distance: 133 mm (5.24 inches)
- Pieces included: 1 duct connector flange
- Hose clamp: prepare separately
- Suitable for: dryer vents, exhaust fans, range hoods
- Price group: budget
HG Power 6 Inch Duct Connector
The HG Power 6 inch duct connector is an ABS plastic straight pipe flange for 6 inch ducting, and it is the pick for larger runs such as a 6 inch inline fan, a range hood, or a high-volume bathroom exhaust. The flange is inserted inside the pipe rather than wrapped around it, which gives a snug fit where the duct meets the wall or fan housing.
To install it, cut a hole of the matching size, fasten the flange with screws, slide the duct over the collar, and secure it with a clamp. The ABS body is light and easy to handle overhead, and it will not corrode in damp air. Check that your duct is a true 6 inch duct, since flexible ducting can vary slightly.
Specs
- Material: ABS plastic (acrylonitrile butadiene styrene)
- Size: 6 inch (150 mm)
- Connector type: flange, inserted inside the pipe
- Color: black
- Item weight: 5.3 ounces (0.15 kilograms)
- Pieces included: 1 duct connector flange
- Suitable for: HVAC ducting, dryer vents, exhaust fans, range hoods
- Price group: budget
Allvent Duct Connector Flange 6 Inch
The Allvent duct connector flange is a black plastic wall plate and pipe collar for 6 inch ducting, and its main advantage is the range of sizes in its family. The 6 inch version has an opening diameter of 5.75 inches, and the same flange is also offered in 3, 4, and 8 inch sizes, so a household with several duct runs can keep one fitting style.
It mounts with screws to a flat surface, and the round plate covers the rough edge of the wall hole for a tidier finish. Confirm the opening diameter against your duct before ordering: the 5.75 inch opening decides the fit, not the nominal 6 inch size.
Specs
- Material: ABS plastic
- Size: 6 inch, opening diameter 5.75 inches
- Also available: 3, 4, and 8 inch (openings 2.76, 3.82, 7.56 inches)
- Color: black
- Part number: PCG-US280423_9YYXJGLK
- Pieces included: 1 duct connector flange
- Suitable for: dryer vents, HVAC ducting
- Price group: mid-range
PATIKIL 3.5 Inch Duct Connector Flange
The PATIKIL 3.5 inch duct connector flange is the smaller sibling of the 4.25 inch stainless flange, and it is the right choice when the fan outlet or duct measures 3.5 inches across. That size shows up on compact inline fans and small bathroom exhaust fans, where a 4 inch fitting would be loose and a 3 inch fitting would not slide on. The stainless steel body gives the same rust and temperature resistance.
Like the 4.25 inch model, it mounts to a wall with screws and accepts a duct hose over its collar, secured with a clamp you supply. The compact face fits tight spots behind equipment and inside cabinets. Measure the interface diameter first: the collar has an outer diameter of 89 mm (3.5 inches).
Specs
- Material: 201 stainless steel
- Interface outer diameter: 89 mm (3.5 inches)
- Part number: pta241010tt002197
- Pieces included: 1 duct connector flange
- Hose clamp: prepare separately
- Suitable for: compact inline fans, bathroom exhaust fans, dryer vents
- Price group: budget
Hon&Guan 3 Inch Duct Connector 2-Pack
The Hon&Guan 3 inch duct connector is sold as a 2-pack of ABS plastic flanges, and it is the practical pick when a job needs two identical small connections, such as a pair of bathroom exhaust fans. Buying the pair keeps both fittings matched in size, color, and mounting pattern. Each flange is a straight pipe collar with a mounting plate, and the set includes clamps.
Each flange has an outside diameter of 75 mm (3 inches), and the compact plate measures 3.9 x 2.9 x 1.9 inches, so it fits narrow wall sections and inside cabinets. To install, cut a hole of the matching size, fix the flange with screws, connect the ducting, and tighten the attached clamp. The ABS body suits dryer vents, extractor fans, and cooker hoods.
Specs
- Material: ABS plastic (acrylonitrile butadiene styrene)
- Size: 3 inch, 2-pack
- Outside diameter: 75 mm (3 inches)
- Item dimensions: 3.9 x 2.9 x 1.9 inches
- Item weight: 3.52 ounces
- Part number: PM157
- Pieces included: 2 duct connector flanges
- Clamps: included
- Suitable for: dryer vents, extractor fans, hydroponics, cooker hoods
- Price group: mid-range
How to Choose a Duct Connector
Start with the diameter of the duct and the outlet you are joining. Measure the outside diameter of the rigid duct or fan outlet, and match it to the interface diameter of the connector, not to the nominal size on the packaging. Flexible ducting can measure slightly larger or smaller than its label, so a tape measure across the actual duct is more reliable. A connector a fraction too small will not slide on, and one too large will leak air around the joint.
Next, choose the material for the air it will carry. Stainless steel flanges suit hot, damp exhaust air from dryers and range hoods, and they resist rust over years of use. ABS plastic flanges are lighter, easier to handle overhead, and fine for cooler runs such as bathroom exhaust fans and inline fans.
Then check the mounting. A flange connector needs a flat surface large enough for its face, plus room for the screw holes. If the surface is curved, rough, or too small, a straight coupling that joins two duct ends may fit better. Confirm whether the listing includes clamps and screws, since some flanges ship with clamps while others expect you to supply them yourself. Finally, count the connections: a single flange covers one joint, a 2-pack covers a pair of matching runs, and one family offering 3, 4, 6, and 8 inch versions keeps the style consistent.
Who Should Skip a Duct Connector Flange
Skip a flange-style connector if the joint has no flat surface to mount to. Two lengths of flexible duct joined in mid-air, or a run that changes direction inside a ceiling void, are better served by a straight coupling or an elbow fitting that grips both duct ends without a wall plate.
Also skip this fitting if your ducting is rectangular or oval: every connector here is built for round duct, and a round collar on a rectangular duct end leaves gaps that tape cannot seal.
Finally, skip a plastic flange when the exhaust air runs hot enough to soften it, such as above a commercial cooking appliance or on a high-temperature industrial exhaust. A metal flange, or a fitting rated for those temperatures, is the safer choice. If local building rules cover the install, such as a dryer vent that must use rigid metal duct, follow those rules.
Frequently Asked Questions
What size duct connector do I need?
Measure the outside diameter of the duct or fan outlet, then match it to the interface diameter of the connector. Flexible ducting can vary slightly from its labeled size, so measure the real duct with a tape measure instead of trusting the box.
Do duct connectors come with clamps and screws?
It varies by product. Some flanges ship with clamps included, while others expect you to supply a hose clamp and screws separately. Check the packing list before ordering, and keep a clamp and screws on hand so the install is not held up by a missing part.
Can I use a plastic duct connector for a dryer vent?
A plastic ABS flange works for many home dryer vents, since the exhaust air cools as it travels through the duct, but stainless steel is the better choice where the air is hottest, such as at the dryer outlet. If local building rules require rigid metal duct, follow those rules and use a metal fitting.
How do I seal a duct connector joint?
Slide the duct fully over the collar, then tighten a hose clamp until the duct grips the collar evenly. Fasten a wall-mounted flange flat against the surface with screws so the plate cannot rock, and check the joint after the fan has run. If air still escapes, loosen the clamp, reseat the duct, and tighten again.
Final Verdict
The PATIKIL 4.25 inch stainless steel duct connector flange is the best duct connector for most home jobs: its metal body handles hot, damp exhaust air, its screw-mounted flange holds firm, and its 4.25 inch interface fits the dryer vents and small exhaust fans found in many homes. For 6 inch runs, the HG Power ABS flange and the Allvent flange both do the job. For 3 inch work, the Hon&Guan 2-pack covers two connections at once, and the PATIKIL 3.5 inch flange fills the gap between 3 and 4 inch sizes. Measure your duct first.





Write Your Review
No reviews yet. Be the first to share your experience!