- Top Pick: HEATIT HISD Pipe Heating Cable, 24 Feet
- Runner-up: HEATIT JHSF Self-Regulating Heating Cable, 9 Feet
- Also consider: Frost King HC6A Automatic Electric Heat Cable Kit, 6 Feet
A frozen water pipe can split open and flood a home, and the damage often shows up only after the ice thaws. Pipe heat tape, also called heat cable, is an electric cable that runs along an exposed water pipe and adds a small amount of heat, keeping the water inside above freezing through a cold night. It is a different tool from passive pipe insulation, which only slows heat loss; heat tape actively warms the pipe, and the two work best together, with insulation fitted over the cable to hold the heat in.
- Quick Answer
- 1. HEATIT HISD Pipe Heating Cable, 24 Feet
- 2. HEATIT JHSF Self-Regulating Heating Cable, 9 Feet
- 3. Frost King HC6A Automatic Electric Heat Cable Kit, 6 Feet
- 4. Wrap-On Pipe Heating Cable 31060, 60 Feet
- 5. EasyHeat Freeze Free Heating Cable 2102, 100 Feet
- How to Choose Pipe Heat Tape
- Who Should Skip Pipe Heat Tape
- Frequently Asked Questions
- Final Verdict
This guide compares five pipe heat tape products for the most common home jobs, from a short thermostat kit for a single crawl space line to a long self-regulating spool for a run through an unheated garage. Each pick is described from its published specifications, including cable type, length, wattage, thermostat behavior, and pipe compatibility. Measure the length of pipe you need to protect first, because a cable must match the run it covers, and never use a cable longer than the pipe it protects.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most homes, the HEATIT HISD 24-foot cable is the best all-around pick, because its constant-wattage design, built-in thermostat, and generous length suit a typical exposed run. The HEATIT 9-foot cable covers short lines, the Frost King HC6A is the classic budget kit, the Wrap-On 31060 suits long runs, and the EasyHeat Freeze Free spool handles cut-to-length jobs.
1. HEATIT HISD Pipe Heating Cable, 24 Feet
The HEATIT HISD 24-foot cable is the most useful pick in this group, because it combines a proven constant-wattage design with a length that covers a typical exposed run in one piece. The cable puts out 7 watts per foot at 120 volts, with a built-in thermostat that switches it on as temperatures drop toward freezing and off again as the pipe warms. It suits metal and plastic water pipes, and the kit includes glass cloth tape for fixing the cable to the pipe. The cable carries CSA and ETL certification, which matters for an electric product that runs on a water pipe all winter. The trade-off is the constant-wattage design: it cannot be overlapped, so it must be laid flat along the pipe exactly as the instructions describe.
Specs
- Cable type: Constant-wattage heating cable with built-in thermostat
- Length: 24 feet
- Power: 120 volts, 7 watts per foot
- Fit: Metal and plastic water pipes
- Certification: CSA and ETL certified
- Installation: Fix to pipe with included glass cloth tape, cover with insulation
- Price tier: Mid-range
2. HEATIT JHSF Self-Regulating Heating Cable, 9 Feet
The HEATIT JHSF 9-foot cable is the pick for a short exposed line that needs steady, energy-saving heat. This self-regulating cable adjusts its heat output along its length in response to the surrounding temperature, putting out more heat where the pipe is coldest and less where it is warmer. It runs at 120 volts and 3 watts per foot, with a built-in thermostat, and it suits metal and plastic home pipes, including PVC and PEX. It is ETL listed and rated to keep water flowing in very cold weather. The limitation is length: a longer run needs a longer cable, since this cable must never be cut or altered.
Specs
- Cable type: Self-regulating heating cable with built-in thermostat
- Length: 9 feet
- Power: 120 volts, 3 watts per foot
- Fit: Metal and plastic home pipes, including PVC and PEX
- Certification: ETL listed
- Installation: Pre-assembled plug-in cable, fix along pipe, cover with insulation
- Price tier: Budget
3. Frost King HC6A Automatic Electric Heat Cable Kit, 6 Feet
The Frost King HC6A is the classic hardware-store heat cable kit, and it is the simplest option in this group for a short metal or plastic water pipe. The pre-assembled 6-foot cable runs at 120 volts and 7 watts per foot, with a built-in thermostat that switches on below 38 degrees Fahrenheit and off above 45 degrees. It fits copper and iron water supply pipes as well as Schedule 40 plastic pipe. The kit is a single plug-in unit with no wiring to do, so installation is a matter of taping the cable flat along the pipe and covering it with insulation. The rules are strict: never overlap the cable, never use a cable longer than the pipe, never install it inside a wall, and do not use it on PVC pipe or hoses.
Specs
- Cable type: Constant-wattage heating cable with built-in thermostat
- Length: 6 feet
- Power: 120 volts, 7 watts per foot
- Fit: Metal and Schedule 40 plastic water supply pipes, 3/8 inch to 1-1/2 inches
- Thermostat: On below 38 degrees Fahrenheit, off above 45 degrees
- Installation: Plug-in kit, tape flat along pipe, cover with insulation
- Price tier: Budget
4. Wrap-On Pipe Heating Cable 31060, 60 Feet
The Wrap-On 31060 is the pick for a long run of pipe that a short kit cannot cover. At 60 feet, this low-wattage cable with a built-in thermostat protects a full line through a crawl space, along a garage wall, or out to a pump house in a single piece, with no joints in the middle of the run. It runs at 120 volts and is designed for water pipes, with the thermostat switching the cable on only when the temperature drops toward freezing. The cable is made by PIRIT Heated Products, a maker that has sold pipe heating cable for decades. The long length is also the thing to plan around: measure the pipe run carefully before ordering, because a cable that is longer than the pipe cannot be shortened, doubled back, or overlapped.
Specs
- Cable type: Low-wattage heating cable with built-in thermostat
- Length: 60 feet
- Power: 120 volts
- Fit: Water pipes
- Manufacturer: PIRIT Heated Products, model 31060
- Installation: Pre-assembled plug-in cable, fix along pipe, cover with insulation
- Price tier: Mid-range
5. EasyHeat Freeze Free Heating Cable 2102, 100 Feet
The EasyHeat Freeze Free 2102 is the pick for long or awkward runs where a fixed-length kit does not fit. This is a 100-foot reel of self-regulating cable that can be cut to the length the job needs, with a minimum circuit length of 3 feet and a maximum of 75 feet. It runs at 120 volts and 3 watts per foot at 50 degrees Fahrenheit, and it suits residential metal and plastic water supply and drain pipes, including PVC and PEX. Because the cable is self-regulating, it can be overlapped without creating hot spots, which gives more freedom on runs with bends, valves, and fittings. The reel needs the maker’s fused plug kit and end seal, sold separately. It is UL listed and CSA certified, including for manufactured homes.
Specs
- Cable type: Self-regulating, cut-to-length heating cable
- Length: 100-foot reel, cut to length, 3-foot minimum, 75-foot maximum circuit
- Power: 120 volts, 3 watts per foot at 50 degrees Fahrenheit
- Fit: Residential metal and plastic water supply and drain pipes
- Certification: UL listed, CSA certified
- Installation: Cut to length, fit fused plug kit and end seal, cover with insulation
- Price tier: Premium
How to Choose Pipe Heat Tape
Start with the pipe itself. Measure the length of exposed pipe that needs protection, and choose a cable that matches it, since a cable must never be longer than the pipe it protects and a fixed-length cable cannot be cut. Next, check the pipe material. Most cables suit metal and plastic water pipes, but the rules differ by maker: Frost King kits exclude PVC pipe, while self-regulating cables from HEATIT and EasyHeat list PVC and PEX as suitable. Then decide between cable types. A self-regulating cable adjusts its heat output with temperature and can be overlapped, which makes it the safer default for most homes. A constant-wattage kit with a built-in thermostat is simpler and cheaper for a short straight run, but it must be laid flat with no overlap. Finally, plan the insulation. Every maker calls for fire-resistant insulation over the cable, usually half-inch fiberglass with a vapor seal, because the insulation holds the heat against the pipe.
Who Should Skip Pipe Heat Tape
Pipe heat tape is not the right fix for every cold pipe. If a pipe has already frozen and burst, heat tape will not repair it; the damaged section needs replacing by a plumber first. Pipes inside a finished wall, floor, or ceiling should never have heat cable fitted, since the cable cannot be inspected and a fault would be hidden. Homes in mild climates where pipes never approach freezing gain nothing from an electric cable, and plain insulation is the better buy. Renters should pause before buying, since fitting a cable to the plumbing belongs to the property owner. Anyone without a grounded, ground-fault-protected outlet near the pipe should not improvise with an extension cord; get an electrician to fit a proper outlet first.
Frequently Asked Questions
How long a heat tape cable do I need?
Measure the exposed pipe from end to end and choose a cable that matches that length. A cable must never be longer than the pipe it protects, and a fixed-length kit cannot be cut or shortened. For a run with bends and fittings, a self-regulating cable gives more room for error.
Can heat tape be used on plastic pipes?
It depends on the maker. Self-regulating cables from HEATIT and EasyHeat list PVC and PEX as suitable, while Frost King kits are rated for metal and Schedule 40 plastic pipe and exclude PVC. Check the maker’s compatibility list for the exact cable you buy, and match it to the marking on your pipe.
Does pipe heat tape need insulation over it?
Yes. Every maker calls for fire-resistant insulation fitted over the cable, usually half-inch fiberglass with a vapor seal. The insulation holds the heat against the pipe and keeps the cable efficient. Never fit the cable over existing insulation.
Is pipe heat tape safe to leave plugged in all winter?
A cable with a built-in thermostat switches itself on and off with temperature, so it is designed to stay plugged in through the cold season. Even so, check the cable for damage each time you plug it in, and at least once a year if it stays plugged in. Always use a grounded outlet protected by a ground-fault interrupter, and follow the maker’s instructions exactly.
Final Verdict
The best pipe heat tape for most homes is the HEATIT HISD 24-foot cable, because its constant-wattage design, built-in thermostat, and generous length cover a typical exposed run in one piece. For a short line, the HEATIT 9-foot self-regulating cable and the Frost King HC6A kit are the simplest buys, while the Wrap-On 31060 covers long runs and the EasyHeat Freeze Free spool handles jobs where no standard length fits. Whichever cable you choose, measure the pipe, match the cable to the pipe material, and fit fire-resistant insulation over it.





Write Your Review
No reviews yet. Be the first to share your experience!