⏱ 4 min read  ·  ✅ Updated Nov 2026

The best weather stripping for a window air conditioner is a compressible foam or closed-cell rubber seal that fills the gaps between the unit, the sash and the window frame. A good seal stops warm air, insects and drafts, and it helps the unit cool more efficiently. Match the material to the gap size.

Quick Picks by Need

  • Narrow gaps along the sash: self-adhesive closed-cell foam tape in a suitable thickness
  • Wide side-panel gaps: dense foam board or insulating panels cut to size
  • Reusable seasonal seal: a rubber or sponge strip that peels away cleanly at season end
  • Damp or outdoor-facing edges: closed-cell material that resists absorbing water
  • Quick top-up: a roll of foam sealing tape for small drafts and rattles

Why sealing the unit matters

A window air conditioner is designed to separate the hot outdoor side from the cooler indoor side, but the accordion panels and the window sash rarely form a perfect seal. Gaps let hot air flow in and let cool air leak out, which forces the compressor to run longer.

Gaps can also let in insects, dust and noise. Sealing them is a low-effort improvement that often makes a visible difference in comfort, particularly in older windows where the frame is uneven.

Drafts also cause noise. A loose side panel can whistle or rattle when wind blows or the compressor vibrates, and a continuous bead of compressible seal often quiets it. If you notice dust lines or insects near the unit, that is a good sign that a gap is open somewhere.

Types of weather stripping compared

Not every material suits every gap. Compare the options by where they will be used and how long you want them to last.

  • Closed-cell foam tape: common, flexible and easy to cut, good for gaps between the sash and the unit.
  • Open-cell foam: compresses easily but can absorb moisture, so it suits dry interior locations.
  • Rubber or EPDM strips: durable and weather resistant, good for repeated seasonal use.
  • Rigid foam board: handy for filling large side-panel openings and adding insulation.
  • Removable rope-style caulk: useful for odd shapes, but can be messy to clean.

Choose a thickness that compresses slightly when the window closes, because a seal that is too thin leaves gaps and one that is too thick can prevent the sash from closing.

Think about the climate, too. In very humid regions, moisture-resistant materials last longer, and in cold regions flexible rubber keeps its shape better than rigid plastic. If sunlight hits the seal directly, choose a product that resists UV, because some foams harden and crumble after a season in the sun.

How to measure and install

Start by cleaning the surfaces so adhesive bonds properly. Remove old residue, dust and grease, and let the surface dry. Measure each gap and cut strips slightly long so they compress at the ends.

Apply the strip along the top of the lower sash, the bottom of the unit, and around the accordion panels where they meet the frame. Close the window gently to compress the material and check for light showing through. Light usually means air can get through.

If the unit is heavy or the window is old, support the unit with a bracket, because weatherstripping is not a structural fix. Never block drain holes or vents on the unit, as that traps moisture and may cause water damage.

For wide gaps beside the accordion panels, many people cut rigid insulation board to fit and then seal the edges with foam tape. This is more effective than stuffing fabric or paper, which absorbs moisture and does little to stop airflow. A small piece of wood or a bracket can hold the board in place without damaging the window.

Maintenance and common mistakes

Inspect the seal at the start of each cooling season. Foam can compress permanently, crack or absorb moisture over time, so replace worn strips instead of layering new ones over old.

  • Do not cover the drain holes at the bottom of the unit.
  • Avoid adhesives that damage painted frames if you rent.
  • Do not use materials that trap water against wood.
  • Remove strips cleanly at season end to prevent residue buildup.

A tidy seal also makes winter removal easier. If you leave the unit in over winter, use an outside cover that the manufacturer approves and seal the inside edges to reduce drafts.

Another point is safety. The window should still close securely after sealing, and the seal must never block an emergency exit window. Check local rules for rental properties and fire safety before permanently blocking or sealing any window that serves as an escape route.

Frequently Asked Questions

What thickness of weather stripping should I use?

Choose a thickness that compresses lightly when the window closes. Measure the gap at several points and test with a small piece first.

Can I use the same weather stripping for the whole unit?

Often you will use more than one type, such as foam tape for narrow gaps and rigid foam for wide side-panel openings.

Will weather stripping damage my window frame?

Adhesive strips can leave residue or lift paint. Test a small spot and pick a removable product if you rent.

How often should I replace it?

Inspect it each season and replace it when it is compressed flat, cracked or no longer sticks. Many owners replace it every year or two.

Final Thoughts

A good seal around a window air conditioner is inexpensive and effective. Measure the gaps, choose a closed-cell material that suits them, and install it on clean, dry surfaces. Check it every season so the unit keeps cooling efficiently and keeps out drafts and insects.

Explore Our Guides & Free Tools